AUTOFRY FRYER INSTRUCTIONS
The AUTOFRY Fryer’s instructions are clearly and precisely explained, so they’re easy to understand. What’s more, you’ll find QR codes accompanying each paragraph so you can scan them with your cell phone, and be directed to explanatory videos. Or you can click on the “View video” buttons to view the videos directly in your browser. After that, you’ll know your deep fryer inside out and how to use it properly.
However, if you still have questions after reading these instructions, you can contact us. We’ll do our best to guide you through the explanations.
DOWNLOAD AUTOFRY FRYER INSTRUCTIONS IN PDF FORMAT
Unpacking the deep fryer – What to do?
- View detailed installation video
- Follow each step as seen in the detailed video
- 30 minutes to get the fryer operational
- IMPORTANT: Remove the plastic bag from the charcoal filter behind the plate at the bottom of the fryer.
- Fill the tank with oil up to the COLD line.
- Press ON
- Preheat for 12/15 minutes
- Accessories supplied with fryer: cleaner, degreaser, food chute container, food tongs
FRYING IS
AS SIMPLE AS
1 – 2 – 3
FRYING IS
AS SIMPLE AS
1 – 2 – 3
1 Open the flap on the front door and fill the container
(maximum limit at rim of container). Close the door.
2 Enter the cooking time on the control panel, then press START.
3 When the timer sounds, food is automatically dispensed through the chute(s) (depending on fryer model).
To use the cooking programs, please refer to the programming instructions.
Advice on correct use
MAINTENANCE IS
IMPORTANT FOR THE LIFE
OF YOUR FRYER
DAILY CLEANING
1. Stop the machine to start cleaning.
2. Cleaning should begin when the oil temperature has dropped to 150°F (65°C).
3. Disassemble the food hatch, fryer door and side chute.
4. Clean all parts with warm water and soap.
5. Wash the interior walls with the degreaser supplied with the fryer.
6. WARNING: be careful with the fire extinguishing system.
7. Filter, change or adjust oil level as necessary.
Video QR CODE
DAILY CLEANING
1. Stop the machine to start cleaning.
2. Cleaning should begin when the oil temperature has dropped to 150°F (65°C).
3. Disassemble the food hatch, fryer door and side chute.
4. Clean all parts with warm water and soap.
5. Wash the interior walls with the degreaser supplied with the fryer.
6. WARNING: be careful with the fire extinguishing system.
7. Filter, change or adjust oil level as necessary.
Video QR CODE
WEEKLY MAINTENANCE
1. Start with the first steps of daily cleaning (up to N° 6)
2. Remove Teflon basket and clean with warm water and soap.
3. Drain / filter the oil from the tank through the tap, using the necessary accessories. The tank can be emptied/filtered manually.
4. Remove the pan and clean it with warm water and soap, then use the degreaser supplied with the fryer to clean the outside of the oil pan.
5. Clean the inside walls with the degreaser supplied with the fryer.
WARNING: Be careful with the fire extinguishing system.
6. Open the plate at the bottom of the fryer to remove and clean the oil filter and grease deflector.
7. Wipe the charcoal filter with a cloth to remove oil deposits and food particles.
WARNING: Never wet the charcoal filter.
8. Replace each clean component in the disassembled order.
9. Replenish the bowl with clean oil.
WEEKLY MAINTENANCE
1. Start with the first steps of daily cleaning (up to N° 6)
2. Remove Teflon basket and clean with warm water and soap.
3. Drain / filter the oil from the tank through the tap, using the necessary accessories. The tank can be emptied/filtered manually.
4. Remove the pan and clean it with warm water and soap, then use the degreaser supplied with the fryer to clean the outside of the oil pan.
5. Clean the inside walls with the degreaser supplied with the fryer.
WARNING: Be careful with the fire extinguishing system.
6. Open the plate at the bottom of the fryer to remove and clean the oil filter and grease deflector.
7. Wipe the charcoal filter with a cloth to remove oil deposits and food particles.
WARNING: Never wet the charcoal filter.
8. Replace each clean component in the disassembled order.
9. Replenish the bowl with clean oil.
HOW TO CHANGE THE FILTERS IN YOUR AUTOFRY? (Filters available from Maison Rondeau)
Charcoal filter
Replace charcoal filter (must be changed every 3 months)
Oil filter
Change the steel mesh oil filter (must be changed every 6 months)
Grease deflector
The grease deflector can be cleaned with warm water and soap every week, and should be renewed once a year.
Video QR CODE
How do I switch off the fryer?
• Press the OFF button
→ The fan will run down to 120°F
→ Do not unplug the fryer while the fan is running.
→ An energy-saving mode operates automatically, but can be activated manually by pressing the STANDBY button.
ACCESS TO CONTROL PANEL PROGRAMMING
1. With the control panel in the OFF position, simultaneously press the numbers “2” and “0“.
2. Select 1 to access presets
3. Enter password “222” and press “Start“.
Follow the different steps for each programming
(see the video for a better understanding)
Video QR CODE
2. Select 1 to access presets
3. Enter password “222” and press “Start“.
Follow the different steps for each programming
(see the video for a better understanding)
Video QR CODE
MODIFY PROGRAM NAMES
1. Press 1 to change program name.
2. Use the arrow keys to position the cursor and press CLEAR to delete existing characters.
3. Continue to use the arrow keys to position the cursor and press 1 to modify the program name characters.
4. Repeat the operation for the other characters.
5. Press START to save the program name.
CHANGE THE PRESET COOKING TIME
1. Press 2 to change the preset cooking time.
2. Enter the desired cooking time and press START to save.
3. Adjust the preset time compensation.
(Temperature compensation automatically adjusts the cooking time to take account of the drop in oil temperature as the food cooks).
4. Press 3 to activate or deactivate preset temperature compensation.
5. Select 1 or 2 to switch from YES to NO.
YES = ON / NO = OFF
6. Press START to save.
ACTIVATE OR DEACTIVATE SHAKER FUNCTION
The shaker function automatically lifts and shakes the basket to prevent products from sticking together.
1. Press 4 to activate or deactivate the shaker function.
2. To switch on this function, enter a time between 15 and 30 seconds and press START to save it.
3. To switch off, press CLEAR and then START.
SATISFIED WITH SETTINGS
Press the arrow key to move on to the next preset and repeat the process.
FINALIZE ALL YOUR SETTINGS
Press the POWER button until the display goes out.
You’ve finished programming your Autofry fryer.